Residential Electrical for New Construction and Remodels in Houston, TX
With 10+ years of experience, our team delivers residential electrical for new construction and remodels in Houston, TX, from rough-in to final trim. Builders and homeowners get itemized bids with options at different price points.
Expert Electrical Contractors for Your New Home or Remodel
Builders and homeowners use this service to wire new homes, additions, and remodels from Cypress and Tomball to The Woodlands and Conroe.
Code-compliant rough-in wiring passes inspection without delays, keeps your build on schedule, and leaves capacity for what you add later.
What's Included in Our Residential New Builds & Remodels
- Rough-in and trim-out wiring for custom homes, spec homes, and additions
- Kitchen and bath remodel circuits with GFCI and AFCI protection where code requires it
- Recessed, under-cabinet, and exterior lighting laid out before drywall
- 200 amp service and panel sizing with room for future loads
- Prewiring for EV chargers, standby generators, and smart home systems
When to Call a Remodel Electrician in Houston, TX
Your electrician should come in earlier than most people expect. These four moments save you money, time, and failed inspections.
Bring us in while the floor plan can still change. We can spot a panel that cannot handle the new kitchen, or a lighting layout that will not work with the ceiling framing.
Changes on paper cost nothing. The same change after framing can add hundreds of dollars per circuit. Early input also helps you place outlets where your furniture will actually go.
How We Wire Your Project From Rough-In to Final
Review the Plans
We walk the site or review your plans and mark every outlet, switch, and fixture. You get an itemized bid with options before any wire gets pulled.
Pull the Permit
We file with the City of Houston or the right county or city office for your address. Inspections get scheduled around your build calendar.
Rough-In and Inspect
Boxes, wire, and panel feeds go in while the framing is open. We meet the inspector on site and clear any notes the same week.
Trim Out and Test
After drywall and paint, we install devices, fixtures, and breakers. Every circuit gets tested and labeled before final inspection.
Why Choose Us for Residential Electrical Work in Houston, TX
Builders and homeowners need an electrician who shows up on schedule and bids the job honestly. Harvest Electrical Solutions wires new builds and remodels across Houston, TX, Spring, Tomball, The Woodlands, and Conroe.
10+ Years Wiring Area Homes
Our team brings more than 10 years of hands-on electrical experience to every rough-in, panel, and trim-out.
Itemized Expense Reports for Builders
Every project comes with a detailed expense report, so builders and homeowners can track labor, materials, and changes line by line.
Permits and Inspections Handled
We pull the permit, meet the inspector, and handle any corrections, so your build schedule does not stall.
Frequently Asked Questions
New construction wiring in Houston, TX typically runs $4 to $9 per square foot. For a 2,000 square foot home, that comes to about $8,000 to $18,000 for rough-in, trim-out, panel, and standard devices.
Custom lighting, smart home wiring, and outdoor kitchens push the number up. Remodels price differently, since a new circuit costs $300 to $800 and most kitchen remodels need 3 to 6 of them.
Harvest Electrical Solutions itemizes every bid with options at different price points, and quotes often come in below larger Northwest Houston contractors.
Starting a New Build or Remodel Soon?
Bring us your plans before framing, and we will price the electrical with clear options. Call Harvest Electrical Solutions to book a walkthrough, and ask about 24-month, no-interest financing for qualified customers.
Providing Residential New Builds & Remodels Across Greater Houston
Truth. Integrity. Honor.
Ready to Get Started?
Call us now or request service online. Fast response, honest pricing, quality work — no shortcuts, no surprises.